{"title":"Special","description":null,"products":[{"product_id":"rq152","title":"RQ Hardware: Valeo Bi-xenon Projector","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive.\u003c\/p\u003e \u003cp\u003eGood Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. \u003c\/p\u003e \u003cp\u003eWhats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e ","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989305569457,"sku":"RQ152","price":64.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/rq-hardware-valeo-bi-xenon-projector-1.jpg?v=1754442693"},{"product_id":"h694","title":"RGB Extension cord","description":"\u003cp\u003eRGB Style: Old school \"RGB\" style 4-pin connectors are very commonplace for generic or older style RGB parts. These 4-pin connectors don't have any actual \"latch\" or connector to them, and just basically use four naked pins instead.\u003c\/p\u003e\u003cp\u003eJST Style: The new standard for RGB components, JST connections utilize a black plastic connectors with pins inserted inside. These connectors are much more stable than the \"RGB\" style above, and are our go-to for LED accessory installs!\u003c\/p\u003e","brand":"Acme","offers":[{"title":"JST 4P (10ft)","offer_id":43888262971622,"sku":"H694","price":12.0,"currency_code":"CAD","in_stock":true},{"title":"RGB 4P (10ft)","offer_id":43888263004390,"sku":"H695","price":12.0,"currency_code":"CAD","in_stock":true},{"title":"Rock Light (6ft)","offer_id":43888263037158,"sku":"H696","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/rgb-extension-cord-1.jpg?v=1754442713"},{"product_id":"wp321","title":"HD T-TAP Wire Connector","description":"\u003cp\u003eJust Tap It In: For the longest time, wire taps have been reduced to the last thought and it shows--chintzy blue crimps and cheap blue female spade terminals. We're putting our foot down--no more!\u003c\/p\u003e \u003cp\u003eHelpful: These connectors are straight up badass. Insert the wire. Press closed. Get on with your project. We've not seen a better T-Tap design before these. They're that solid.\u003c\/p\u003e \u003cp\u003eSold Individually: These little guys are sold individually, so be sure to stock up. Both the double and single options are for use on 24-18 gauge 12V wiring. No amplifier installs here, but rock solid for all your accent lighting needs.\u003c\/p\u003e \u003cp\u003eDE Grease: We strongly recommend opting for the dielectric grease to ensure moisture and liquids can't contact the metal in these taps. With grease, your install is golden.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Single Wire","offer_id":43888976396518,"sku":"WP321","price":8.0,"currency_code":"CAD","in_stock":true},{"title":"Double Wire","offer_id":43888976429286,"sku":"WP322","price":6.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/hd-t-tap-wire-connector-1.jpg?v=1754442716"},{"product_id":"led112","title":"9in: Profile Prism Strip w\/ Driver (RGB)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to LED Strips; easily the one we recommend. Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old; Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. Their color changing kits are unrivaled, and here's why.\u003c\/p\u003e\u003cp\u003eWhat's Weird: Most everybody who buys an RGB setup is crazy focused on how it works in the white-mode...almost as if that's even more important than the rest of the colors. Well, the good news is that the new Profile Prism strips and their drivers have been tuned to produce an amazingly clear, neutral white, amber, and every other color in the spectrum for that matter. When paired up with the Morimoto XBT Controller \u0026amp; smart phone app, these produce very accurate colors...reds, blues, greens, teals, purples, pinks...you name it!\u003c\/p\u003e\u003cp\u003eUniformity: We've never seen an RGB ring produce such uniform, bright light. An updated blend of phosphorous silicone coats the front face of the Prism LED strips and is responsible for their neutral \"white when off\" look and their amazing, uniform intensity - which is unlike anything else on the market. If you want to go for the \"braces\" look with all the exposed, generic LED's that everybody else is pushing...go for it...but you wont find any of that old-school stuff here.\u003c\/p\u003e\u003cp\u003eEZ-Mount:There are three micro-mounts integrated into their backing, making the Prism's the easiest and cleanest strips on the market to install. (Patent Pending) Now you can forget about failing glue or wires wrapped around the face of your install. Don't be \"that guy\" with dripping glue or picture hanging wire visible inside your headlights.\u003c\/p\u003e\u003cp\u003eReliability: The innovative Hybrid-LED color-changing technology delivers a virtually infinite lifespan of 50,000 hours. That's almost six straight years! Because they're based on much more stable and mature SMD-LEDs; they are considerably more reliable between hot\/cold cycles compared to \"new\" COB based products. The complexity of their circuit boards has been minimized to reduce the chance of a failed contact, and the four solder points on the back are protected with resin.\u003c\/p\u003e\u003cp\u003ePlug n Play: Unlike competing RGB \"systems\" that require complicated wiring from the user's side, all Prism LED setups are 100% Plug n Play. There is no wire stripping, cutting, or splicing involved within the kit. All wiring is insulated by rubber tubing then protected with TechFlex mesh for an OEM-like appearance, durability, and abrasion resistance. The LED drivers are housed inside an aluminum housing that's been anodized with an attractive piano black finish and laser engraved with the Profile Prism graphics. Make sure your setup looks good inside and out!\u003c\/p\u003e\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control. \u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Profile Performance","offers":[{"title":"Default Title","offer_id":40989308092593,"sku":"LED112","price":102.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9in-profile-prism-strip-w-driver-rgb-1.jpg?v=1754442897"},{"product_id":"led1241","title":"Profile Pixel Wheel Ring: 15.5in RGB (4 PC Set)","description":"\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003ePROFILE PERFORMANCE:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eThe automotive aftermarket's best name in LED Lighting and when you're ready to color coordinate with an upgrade that's truly eye catching, their wheel ring kits are a stand out choice. Profile is working hand-in-hand with the industry's experts to produce the performance that we all expect. Yeah, there are less expensive options on the market and if they were worth considering, we'd carry them instead, but we're confident the Pixel wheel ring setup from Profile is worth the premium and then some.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003eDURABILITY:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eFirst of all, these things mount inside of the wheels on your vehicle. You can't expect to install some floppy no-name piece of crap in there and then expect it to hold up over time. After a month subjected to road vibration, moisture, debris: if its inferior it's going to fall apart. The Pixel's parts are made of thick extruded aluminum. All of the hardware is stainless, and the LED gear is all waterproof. While they're going to look pretty sitting in a parking lot, these things are designed for cars and trucks that are going to get driven. All Pixel Rim Rings are assembled and quality controlled in Atlanta, Georgia.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003eINTENSITY:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eLook, we know you don't need these to be bright because your wheels need to see where they're going at night--we want them to be bright because overkill is under rated! We'll let the pictures speak for themselves, but lets just say nobody is going to miss your drive by when the Profile rings are illuminated. Not only that, but they utilize anywhere from 80-100 individual LED's per ring (depending on the diameter)--about twice as many as the other options on the market use.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003eCOLOR CHANGING:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eLike the rest of the products in the Profile line, the LED chips on the Pixel Rim rings are fine tuned to produce amazingly clear and accurate colors. Whether you're using the PrismPilot controller or Morimoto's XBT Bluetooth setup, you can easily set them up in whatever shade of red, blue, green, teal, purple, pink you're after. Gotta color coordinate!\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003eWIRING:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEach Pixel Ring has a simple 4-Pin RGBW input cable that's ten feet long, generally enough to make a clean run from front-back on any vehicle. If you need extra length, there are optional plug-n-play extensions available with the kit. All input wiring is insulated in TechFlex mesh for a clean OEM-like appearance and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003eINSTALLATION SUMMARY:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eLift your vehicle. Remove the wheel. Locate at least three positions on the dust shield behind the brake rotor for the L-brackets. Mark, drill the shield and ring for the brackets. Screw together. Run the input wiring to your controller. Power on, Roll out! In all seriousness, it's really not rocket science but if you don't feel confident working with basic measuring and power tools: we suggest having these professionally installed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"lead text-gray2\"\u003eREMOTE CONTROL:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eFirst-time users will need to purchase an optional RGBW Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control.\u003c\/p\u003e\n\u003cp\u003eColor Changing: Like the rest of the products in the Profile line, the LED chips on the Pixel Rim rings are fine tuned to produce amazingly clear and accurate colors. Whether you're using the PrismPilot controller or Morimoto's XBT Bluetooth setup, you can easily set them up in whatever shade of red, blue, green, teal, purple, pink you're after. Gotta color coordinate!\u003c\/p\u003e\n\u003cp\u003eWiring: Each Pixel Ring has a simple 4-Pin RGB input cable that's ten feet long, generally enough to make a clean run from front-back on any vehicle. If you need extra length, there are optional plug-n-play extensions available with the kit. All input wiring is insulated in TechFlex mesh for a clean OEM-like appearance and durability.\u003c\/p\u003e\n\u003cp\u003eInstallation Summary: Lift your vehicle. Remove the wheel. Locate at least three positions on the dust shield behind the brake rotor for the L-brackets. Mark, drill the shield and ring for the brackets. Screw together. Run the input wiring to your controller. Power on, Roll out! In all seriousness, it's really not rocket science but if you don't feel confident working with basic measuring and power tools: we suggest having these professionally installed.\u003c\/p\u003e\n\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGB Controller. The Morimoto XBT is recommended for the best performance and color accuracy, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently. The Profile PrismPilot is a more basic RF-based setup that has four channels, but no smartphone app or independent output control.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e","brand":"Profile Performance","offers":[{"title":"Default Title","offer_id":40989311697073,"sku":"LED1241W.4","price":249.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/profile-pixel-wheel-ring-15_5in-rgb-4-pc-set-1.jpg?v=1754443266"},{"product_id":"a332","title":"Halo Installation Wire","description":"\u003cp\u003eDo it right: When installing halos, put down the epoxy! Pros know thin wire is the only way to do it right and hold it tight! Our house-brand copper based wire is whats up.\u003c\/p\u003e \u003cp\u003eInvisible: When properly installed, the beading wire virtually disappears into your headlight - making it next to impossible to see. Compared to using messy glue which can drip or turn yellow over time - this is the way to go.\u003c\/p\u003e \u003cp\u003eBy the Numbers: Each roll is 10 meters long, which means you'll have more than enough to install several sets of halos in your headlights. The material is just .4mm thick, making it hard to see, yet strong enough to hang on forever. \u003c\/p\u003e \u003cp\u003eInstallation: Drill two tiny (.5mm) holes in the surface that you want to mount the halo to. Loop the wire from the back, up over the halo (or using integrated mounting points) then back through the second hole and twist from behind. It's truly that simple to easily mount halos reliably for years to come! \u003c\/p\u003e \u003cp\u003eTrusted: For more than a decade, we've worked hard to earn our killer reputation. Car guys world-wide know that our shop carries the internet's best selection of high performance automotive and powersport lighting products at the best prices, and we've got the best, most knowledgeable team of real enthusiasts to help back it up. If we sell it, then you bet we've put it to the test on our own cars, trucks, and bikes. Need a recommendation on parts for your project? Got a tech question? Wholesale inquiry? Contact Us\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Black","offer_id":43888373268710,"sku":"A332","price":9.75,"currency_code":"CAD","in_stock":true},{"title":"Silver","offer_id":43888373367014,"sku":"A333","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/halo-installation-wire-1.jpg?v=1754443328"},{"product_id":"rq30","title":"RQ Hardware:  Camry \/ FRS (Mini H1)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive.\u003c\/p\u003e \u003cp\u003eGood Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. \u003c\/p\u003e \u003cp\u003eWhats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e ","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989313368241,"sku":"RQ30","price":64.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/rq-hardware-camry-frs-mini-h1-1.jpg?v=1786741583"},{"product_id":"h320","title":"AMP Extension (Single)","description":"\u003cp\u003eAdd A Bit More: When you just need a litttttttttle more length between your AMP output ballast and the input to your bulb or AMP\/D2S adapter. These are a life saver! These extensions will add a whopping 28 or 40 inches of length between your ballasts and bulbs.\u003c\/p\u003e \u003cp\u003eUniversal: Protected in the middle with a hard, yet flexible, rubber lining they have standard male\/female \"AMP\" inputs and outputs on both ends that are compatible with 99% of HID Ballasts and re-based HID bulbs.\u003c\/p\u003e \u003cp\u003eNOTE:  Sometimes old\/used ballasts have trouble striking HID bulbs when their high voltage is passed through an extension like this, so new ballasts are recommended.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989313990833,"sku":"H320","price":10.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/amp-extension-single-1.jpg?v=1754443417"},{"product_id":"h360","title":"AMP to D2S Ballast Adapters (Straight)","description":"\u003cp\u003eReuse Your Ballasts: These will save you some money and allow the use of D2S bulbs with your aftermarket HID ballasts. Works with 99% of aftermarket HID kit ballasts that have \"AMP\" outputs. Please confirm compatibility by checking the product pictures if unsure.\u003c\/p\u003e \u003cp\u003eIndustry Standard: These are built to industry standard specifications for AMP male\/female high-voltage outputs, and \"D2S\" bulbs. They should work with all OEM and aftermarket ballasts and bulbs.\u003c\/p\u003e \u003cp\u003eAdded Length: Another benefit of using these that many don't realize is that they instantly add length to the output on your ballast - giving you a bit more freedom to choose where things are mounted. We'll take it!\u003c\/p\u003e \u003cp\u003eWell-made: These are properly insulated from top to bottom to shield the high-voltage that HID ballasts produced. Thick rubber insulation prevents wires from getting nicked, and voltage from leaking out. Don't want any of that business around here!\u003c\/p\u003e \u003cp\u003eIn Comparison: There are a lot of these read-headed AMP\u0026gt;D2S adapters on the market, you can find something seemingly the same on eBay or Amazon for probably a couple bucks less (we know, because we used to carry the cheaper ones too) - but take it from us, its not worth it. They may cause bulb ignition reliability problems, or even worse, fry the base of your bulbs from poor tolerances. Though still inexpensive, our adapters are top quality!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989315858609,"sku":"H360","price":34.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/amp-to-d2s-ballast-adapters-straight-1.jpg?v=1754443534"},{"product_id":"a85","title":"Pry Tool: Flat Pry Bar","description":"\u003cp\u003eTool Bag: There's something to be said about having the right tools for the job at hand, and rather than sacrifice your favorite flathead screwdriver, use this guy instead. The steel 7.5\" (19cm) long shaft allows for maximum leverage on pesky housings and ball joints. At the grip, the rubberized plastic feels very confidence-inspiring, so give 'er hell!\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989316022449,"sku":"A85","price":19.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/pry-tool-flat-pry-bar-1.jpg?v=1754443556"},{"product_id":"a140","title":"Headlight Adjuster Mount","description":"\u003cp\u003eImperative: Your adjuster mounts are easy to strip, lose, or otherwise demolish during a retrofit, but their health and presence is essential. \u003c\/p\u003e \u003cp\u003eUniversal: Standard sizes fit most headlight assemblies as direct replacements for original parts.\u003c\/p\u003e \u003cp\u003eOlder Lights? Don't let your new (heavier) reflector assembly sag with old worn out threaded mounts or ball joints, at this price, its worth replacing them if they're a bit tired.\u003c\/p\u003e \u003cp\u003eTwo Styles: Available in two styles, one for threaded rods and another for ball joints mounts. Type A - Square Yellow Type, Type B - Round White Type.\u003c\/p\u003e \u003cp\u003eIndividual: A quantity of \"1x\" is for only one piece. \u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Type A (Threaded Square)","offer_id":43888144548070,"sku":"A140","price":5.0,"currency_code":"CAD","in_stock":true},{"title":"Type B (8mm Ball)","offer_id":43888144613606,"sku":"A120","price":6.0,"currency_code":"CAD","in_stock":true},{"title":"Type B (10mm Ball)","offer_id":43888144580838,"sku":"A130","price":3.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/headlight-adjuster-mount-1.jpg?v=1754443586"},{"product_id":"gtr-a015","title":"Harness: H-Series housing pass-through cables w\/ grommet (9006)","description":"\u003cp\u003eThese harnesses: are designed to allow you to tap into headlight or fog light wiring inside your housing and extend those connections to the outside of the housing passed through the dust cover. Drill a 7\/8\" hole in the dust cover, press the wiring through, and use the rubber grommet to seal the hole for a waterproof connection. Compatible with 9005, 9006, 9012, H10 and 9145 bulbs. Similar to the wiring that comes in our HID conversion kits, but specifically a different product designed for a different purpose.\u003c\/p\u003e \u003cp\u003eThis harness set: was developed to extend the OEM wiring through the dust cover on some vehicles so the installer can mount a CANBUS module or PWM module on the outside of the headlight instead of trying to stuff it inside the headlight. Using this harness reduces heat of the bulb and the module.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989317234865,"sku":"GTR.A015","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/harness-h-series-housing-pass-through-cables-w-grommet-9006-1.jpg?v=1754443618"},{"product_id":"gtr-a016","title":"Harness: H-Series housing pass-through cables w\/ grommet H11 (Pair)","description":"\u003cp\u003eThese harnesses: are designed to allow you to tap into headlight or fog light wiring inside your housing and extend those connections to the outside of the housing passed through the dust cover. Drill a 7\/8\" hole in the dust cover, press the wiring through, and use the rubber grommet to seal the hole for a waterproof connection. Compatible with 9005, 9006, 9012, H10 and 9145 bulbs. Similar to the wiring that comes in our HID conversion kits, but specifically a different product designed for a different purpose.\u003c\/p\u003e \u003cp\u003eThis harness set: was developed to extend the OEM wiring through the dust cover on some vehicles so the installer can mount a CANBUS module or PWM module on the outside of the headlight instead of trying to stuff it inside the headlight. Using this harness reduces heat of the bulb and the module.\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989317267633,"sku":"GTR.A016","price":25.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/harness-h-series-housing-pass-through-cables-w-grommet-h11-pair-1.jpg?v=1754443623"},{"product_id":"gtr-led452","title":"Festoon: GTR 360 LED (42mm)","description":"\u003cp\u003eGTR Lighting 42mm Festoon LED Bulbs with 360 Degree Light Output: Perfect for interior dome lights, license plate lights, and anywhere on your vehicle. These bulbs have a safe and low-profile opaque white plastic shell around the LEDs to ensure no contact with metal electrical connections. These bulbs are the exact same dimensions as your original festoon bulbs and install with ease.\u003c\/p\u003e \u003cp\u003eNOT CANBUS COMPATIBLE: These bulbs are polarity-universal, meaning they can be plugged in either way and they will still work - this makes for a super easy install! These LED bulbs will replace any 41 - 44mm Festoon dome light bulbs. These LED bulbs will replace C5W, DE3423, DE3425, 6411, 6418, 569, 578, 579, 6413, 6429, 211-2, 212-2, 214-2, and 2122 dome light bulbs.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989317726385,"sku":"GTR.LED452","price":27.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/festoon-gtr-360-led-42mm-1.jpg?v=1754443669"},{"product_id":"gtr-led230","title":"T10\/194: GTR Lighting Carbide LED Bulbs","description":"\u003cp\u003eGTR Lighting Carbide Series T10\/194\/168 LED Bulbs: The all new Carbide Series LED Bulb Upgrades from GTR Lighting are the next evolutionary step in affordable and bright LED lighting for your car or truck! This new style of LED bulb replacement uses 4 individual LED chips in a forward-facing pattern pattern to create a monstrous amount of light in a uni-directional beam. The new Carbide Series LED bulbs are designed to \"work smarter, not harder\" utilizing a super-efficient LED chip and driver design which allows for massive amounts of light at a very small power level usage. \u003c\/p\u003e\u003cp\u003eUsage: These bulbs are going to be way way way brighter than almost anything else you'll find in a T10\/194 bulb. They are too bright to be used in most interior lighting application. Specifically designed for exterior use due to their brightness. They'll work fine inside a vehicle, but are so bright some of your passengers may not appreciate it. This is the next generation in smart LED lighting for cars and trucks, sold in pairs. These Carbide Series LED bulb upgrades from GTR Lighting are the best value on the market for exterior vehicle indicator lights.\u003c\/p\u003e\u003cp\u003eConstant Current Driver: The Carbide Series of LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage\/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877813944550,"sku":"GTR.LED230-2PK","price":34.0,"currency_code":"CAD","in_stock":true},{"title":"Amber","offer_id":43877813977318,"sku":"GTR.LED232-2PK","price":33.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/t10194-gtr-lighting-carbide-led-bulbs-1.jpg?v=1754443688"},{"product_id":"gtr-led272","title":"1156: GTR Lighting Armor Series","description":"\u003cp\u003eThe Armor Series of LED bulb: is impressively bright, with an unparalleled Black-Chrome style. The white is one of the brightest bulbs we offer, and the other colors are vibrant and impressive. The Armor series look great on and off, so if you're looking for a super bright option that also looks cool, you've found the right option!\u003c\/p\u003e\n\u003cp\u003eUsing state of the art: 2835 SMD LED chips to produce unparalleled light output with high-efficiency power usage! The focusing lens on top creates a 165 degree beam pattern output and the decorative metal style of the bulb surrounding is an excellent heat sink. This means we can push these LEDs to the limit without risk of damaging them from heat! Get ready for an amazing bulb that will last a very long time.\u003c\/p\u003e\n\u003cp\u003eThe circuitry: in the Armor series of LED bulbs by GTR Lighting is unique, in that it will work with any OEM wiring configuration you will find. CK Style, SACK style, normal\/traditional style, it will work in all socket types. This makes your life easier by having a great performing bulb that takes zero guesswork to install!\u003c\/p\u003e\n\u003cp\u003eRecommended Application: Fog Lights, Daytime Running Lights, Back up \/ Reverse Lights\u003c\/p\u003e\n\u003cp\u003eConstant Current Driver: The Armor Series of LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage\/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877691031782,"sku":"GTR.LED272-2PK","price":126.0,"currency_code":"CAD","in_stock":true},{"title":"Amber","offer_id":43877691064550,"sku":"GTR.LED270-2PK","price":100.1,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":43877691097318,"sku":"GTR.LED271-2PK","price":94.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/1156-gtr-lighting-armor-series-1.jpg?v=1754443694"},{"product_id":"gtr-led276","title":"1157: GTR Lighting Armor Series","description":"\u003cp\u003eThe Armor Series of LED bulb: is impressively bright, with an unparalleled Black-Chrome style. The white is one of the brightest bulbs we offer, and the other colors are vibrant and impressive. The Armor series look great on and off, so if you're looking for a super bright option that also looks cool, you've found the right option!\u003c\/p\u003e\n\u003cp\u003eUsing state of the art: 2835 SMD LED chips to produce unparalleled light output with high-efficiency power usage! The focusing lens on top creates a 165 degree beam pattern output and the decorative metal style of the bulb surrounding is an excellent heat sink. This means we can push these LEDs to the limit without risk of damaging them from heat! Get ready for an amazing bulb that will last a very long time.\u003c\/p\u003e\n\u003cp\u003eThe circuitry: in the Armor series of LED bulbs by GTR Lighting is unique, in that it will work with any OEM wiring configuration you will find. CK Style, SACK style, normal\/traditional style, it will work in all socket types. This makes your life easier by having a great performing bulb that takes zero guesswork to install!\u003c\/p\u003e\n\u003cp\u003eRecommended Application: Fog Lights, Daytime Running Lights, Back up \/ Reverse Lights\u003c\/p\u003e\n\u003cp\u003eConstant Current Driver: The Armor Series of LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage\/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877692014822,"sku":"GTR.LED276-2PK","price":81.9,"currency_code":"CAD","in_stock":true},{"title":"Amber","offer_id":43877692047590,"sku":"GTR.LED273-2PK","price":115.5,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":43877692080358,"sku":"GTR.LED274-2PK","price":100.1,"currency_code":"CAD","in_stock":true},{"title":"Switchback","offer_id":43877692113126,"sku":"GTR.LED275-2PK","price":100.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/1157-gtr-lighting-armor-series-1.jpg?v=1754443700"},{"product_id":"gtr-led474","title":"Festoon: GTR Vanity LED Bulbs (29mm)","description":"\u003cp\u003eGTR Lighting 29MM \"Vanity\" Festoon 3-LED Bulbs: This High Power LED bulb has length of 29mm which can fit most vanity mirror or puddle light applictations that use small festoon lights. This package has 2 LED festoon bulbs that feature 3 LEDs.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877992235238,"sku":"GTR.LED474","price":26.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":43877992268006,"sku":"GTR.LED473","price":16.9,"currency_code":"CAD","in_stock":true},{"title":"Blue","offer_id":43877992300774,"sku":"GTR.LED471","price":26.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/festoon-gtr-vanity-led-bulbs-29mm-1.jpg?v=1754443709"},{"product_id":"gtr-led283","title":"3157\/3156: GTR Lighting Armor Series","description":"\u003cp\u003eThe Armor Series of LED bulb: is impressively bright, with an unparalleled Black-Chrome style. The white is one of the brightest bulbs we offer, and the other colors are vibrant and impressive. The Armor series look great on and off, so if you're looking for a super bright option that also looks cool, you've found the right option!\u003c\/p\u003e\n\u003cp\u003eUsing state of the art: 2835 SMD LED chips to produce unparalleled light output with high-efficiency power usage! The focusing lens on top creates a 165 degree beam pattern output and the decorative metal style of the bulb surrounding is an excellent heat sink. This means we can push these LEDs to the limit without risk of damaging them from heat! Get ready for an amazing bulb that will last a very long time.\u003c\/p\u003e\n\u003cp\u003eThe circuitry: in the Armor series of LED bulbs by GTR Lighting is unique, in that it will work with any OEM wiring configuration you will find. CK Style, SACK style, normal\/traditional style, it will work in all socket types. This makes your life easier by having a great performing bulb that takes zero guesswork to install!\u003c\/p\u003e\n\u003cp\u003eRecommended Application: Fog Lights, Daytime Running Lights, Back up \/ Reverse Lights\u003c\/p\u003e\n\u003cp\u003eConstant Current Driver: The Armor Series of LED bulbs from GTR Lighting are built using a state of the art Constant Current Driver inside the bulb. This allows them to be more reliable when used on vehicles that have voltage fluctuations due to electrical system design or fault. A constant current driver is a device that takes any incoming voltage and smooths it out, regulates it, so a steady stream of voltage\/current reaches the LED. This helps the LED bulb last longer than bulbs that don't have this device built in.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877693423846,"sku":"GTR.LED283-2PK","price":115.5,"currency_code":"CAD","in_stock":true},{"title":"Amber","offer_id":43877693456614,"sku":"GTR.LED280-2PK","price":126.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":43877693489382,"sku":"GTR.LED281-2PK","price":126.0,"currency_code":"CAD","in_stock":true},{"title":"Switchback","offer_id":43877693522150,"sku":"GTR.LED282-2PK","price":154.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/31573156-gtr-lighting-armor-series-1.jpg?v=1754443713"},{"product_id":"gtr-led534","title":"T10\/194: GTR Low Profile LED Bulbs","description":"\u003cp\u003eGTR Lighting T10\/194\/168 5-LED Bulbs:  \u003c\/p\u003e\u003cp\u003eThese LED bulbs: will replace any T10 bulb, more commonly called 194\/168. Here is the cross reference for this bulb:W5W, 194, 501, 147, 152, 158, 159, 161, 168, 184, 192, 193, 259, 280, 285, 447, 464, 555, 558, 585, 655, 656, 657, 1250, 1251, 1252, 2450, 2652, 2921, \u0026amp; 2825\u003c\/p\u003e \u003cp\u003eThis package: has 2 LED bulbs and they each feature 5 high-power LEDs. These bulbs are perfect for almost any application where they fit. Use them as dome lights, marker lights, blinkers, map lights, floor lights or anywhere!\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877986009318,"sku":"GTR.LED534-2PK","price":32.0,"currency_code":"CAD","in_stock":true},{"title":"Amber","offer_id":43877986042086,"sku":"GTR.LED530-2PK","price":19.5,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":43877986074854,"sku":"GTR.LED533-2PK","price":30.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/t10194-gtr-low-profile-led-bulbs-1.jpg?v=1754443752"},{"product_id":"gtr-led547","title":"T5\/74: GTR 1-LED Bulbs","description":"\u003cp\u003eGTR Lighting T5\/37\/74 1-LED Bulbs:  \u003c\/p\u003e\u003cp\u003eThese LED bulbs: will replace any T5 bulb, commonly found in gauges and console applications. Here is the bulb cross reference guide for this product:#73, 74, 286, 17, 18, 37, 70, 79, 85, 86, \u0026amp; 2721\u003c\/p\u003e \u003cp\u003eThis package: has 2 LED bulbs and they each feature 1 LED. These bulbs are perfect for almost any application where they fit.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"White","offer_id":43877990203622,"sku":"GTR.LED547-2PK","price":26.0,"currency_code":"CAD","in_stock":true},{"title":"Red","offer_id":43877990236390,"sku":"GTR.LED546-2PK","price":40.0,"currency_code":"CAD","in_stock":true},{"title":"Blue","offer_id":43877990269158,"sku":"GTR.LED541-2PK","price":40.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/t574-gtr-1-led-bulbs-1.jpg?v=1754443757"},{"product_id":"sn-led102","title":"880\/893: S-V.4 LED Bulb","description":"\u003cp\u003eCutting-Edge LED Chip Technology: We challenge you to find another bulb on the market that produces as much light as the V.4 while still retaining a perfect beam pattern! The V.4 LED fog light bulbs utilize the newest multi-core LED chip styles that feature one long crystal over the entire diode array to create a seamless light output source. Most LED fog light bulbs on the market essentially create 2, 3, 4, or 6 different light sources by stacking 2-6 different chips together in a line. The NLW1860CV2 chips are based on XD14 technology developed by CREE, this custom designed LED chip has no light gap between diodes which gives it a closer function compared to the original filament bulb, thus achieving a greater beam accuracy that works best in any fog light or fog light housing.\u003c\/p\u003e \u003cp\u003eThermal Management: The V.4 LED fog light bulbs are built from the highest quality 6063 aluminum material originally designed for aircraft and space craft applications. This material has amazing heat dissipation qualities as well as is 100% corrosion resistant in automotive applications. On the bottom of the heat sink lies a high-speed double ball bearing micro-fan that is fully submersible and waterproof! If the fan stops working, the sophisticated thermal management system inside the bulb will dim the fog light until it is safe to use. Considering that these bulbs can be up to 6x brighter than your original bulbs, even at 50% power, they will still be safe to use on the street in most situations. The heavy duty LED bulb power driver has a built in smart fan circuit that ramps up the speed of the cooling fan as necessary so it's as quiet as possible when it can be.\u003c\/p\u003e \u003cp\u003eCompact Design: Most LED fog light bulbs that use a fan-based active cooling system are known for not being small or easy to fit inside fog light housings with a dust cover. The V.4 is designed to be as compact as possible. The mounting depth is 20-25mm on most bulb variants, low profile enough to fit even the most demanding of spaces! The heat sink \/ fan diameter is only 39mm! The LED driver on this bulb is larger than the previous generation, but it is still the right size to fit inside most fog light housings comfortably.\u003c\/p\u003e \u003cp\u003eCANBUS Compliant: Do your LED fog light bulbs flicker, pulse, give you errors and warnings on the dash? Do they even work at all?? Chances are your vehicle employs some version of CANBUS or PWM to control the lighting functions. These complex OEM systems rely on the physical readings of your original fog light filament to determine of your bulbs are operating properly. Simply put, when you install an LED fog light bulb, that function sometime determines that the bulb is broken, or missing entirely and will cause the truck to malfunction. Sometimes this means they don't come on at all, other times they flash, and sometimes they will suddenly shut off while you're driving! All of these things are solved by the built in CANBUS integration circuit found already inside the V.4 LED driver. Sometimes an extra PWM module may still be necessary, but this bulb is totally plug and play on the vast majority of vehicles on the road today, even brand new models!\u003c\/p\u003e \u003cp\u003eDimming: The V.4 bulbs dim less and less bright until they turn off at 8V DC.\u003c\/p\u003e \u003cp\u003eDRL: If the DRL function is lower than 8V DC, the bulbs will just not turn on at all. But if they use CANBUS or PWM at 12V DC they will work normally.\u003c\/p\u003e\u003cp\u003eCANBUS: Some vehicles use CANBUS function to monitor and control your fog light and fog light bulbs. The V.4 has a slightly larger LED driver than normal because the CANBUS anti-flicker and anti-error circuitry is built in! No external components should be needed to install these bulbs with a CANBUS-Equipped vehicle. Easy plug and play installation. 2 year warranty.\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow light tint and give your ride an updated look with a cool white light beam? Look no further! These LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs.\u003c\/p\u003e \u003cp\u003eThe V.4: comes in every popular style to replace any fog light or fog light bulb. Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching V.4 LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e","brand":"SV4","offers":[{"title":"Default Title","offer_id":40989322412209,"sku":"SN.LED102-2PK","price":171.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/880893-s-v_4-led-bulb-1.jpg?v=1754443867"},{"product_id":"sn-led103","title":"9004: S-V.4 LED Bulb (Hi\/Lo)","description":"\u003cp\u003eCutting-Edge LED Chip Technology: We challenge you to find another bulb on the market that produces as much light as the V.4 while still retaining a perfect beam pattern! The V.4 LED fog light bulbs utilize the newest multi-core LED chip styles that feature one long crystal over the entire diode array to create a seamless light output source. Most LED fog light bulbs on the market essentially create 2, 3, 4, or 6 different light sources by stacking 2-6 different chips together in a line. The NLW1860CV2 chips are based on XD14 technology developed by CREE, this custom designed LED chip has no light gap between diodes which gives it a closer function compared to the original filament bulb, thus achieving a greater beam accuracy that works best in any fog light or fog light housing.\u003c\/p\u003e \u003cp\u003eThermal Management: The V.4 LED fog light bulbs are built from the highest quality 6063 aluminum material originally designed for aircraft and space craft applications. This material has amazing heat dissipation qualities as well as is 100% corrosion resistant in automotive applications. On the bottom of the heat sink lies a high-speed double ball bearing micro-fan that is fully submersible and waterproof! If the fan stops working, the sophisticated thermal management system inside the bulb will dim the fog light until it is safe to use. Considering that these bulbs can be up to 6x brighter than your original bulbs, even at 50% power, they will still be safe to use on the street in most situations. The heavy duty LED bulb power driver has a built in smart fan circuit that ramps up the speed of the cooling fan as necessary so it's as quiet as possible when it can be.\u003c\/p\u003e \u003cp\u003eCompact Design: Most LED fog light bulbs that use a fan-based active cooling system are known for not being small or easy to fit inside fog light housings with a dust cover. The V.4 is designed to be as compact as possible. The mounting depth is 20-25mm on most bulb variants, low profile enough to fit even the most demanding of spaces! The heat sink \/ fan diameter is only 39mm! The LED driver on this bulb is larger than the previous generation, but it is still the right size to fit inside most fog light housings comfortably.\u003c\/p\u003e \u003cp\u003eCANBUS Compliant: Do your LED fog light bulbs flicker, pulse, give you errors and warnings on the dash? Do they even work at all?? Chances are your vehicle employs some version of CANBUS or PWM to control the lighting functions. These complex OEM systems rely on the physical readings of your original fog light filament to determine of your bulbs are operating properly. Simply put, when you install an LED fog light bulb, that function sometime determines that the bulb is broken, or missing entirely and will cause the truck to malfunction. Sometimes this means they don't come on at all, other times they flash, and sometimes they will suddenly shut off while you're driving! All of these things are solved by the built in CANBUS integration circuit found already inside the V.4 LED driver. Sometimes an extra PWM module may still be necessary, but this bulb is totally plug and play on the vast majority of vehicles on the road today, even brand new models!\u003c\/p\u003e \u003cp\u003eDimming: The V.4 bulbs dim less and less bright until they turn off at 8V DC.\u003c\/p\u003e \u003cp\u003eDRL: If the DRL function is lower than 8V DC, the bulbs will just not turn on at all. But if they use CANBUS or PWM at 12V DC they will work normally.\u003c\/p\u003e\u003cp\u003eCANBUS: Some vehicles use CANBUS function to monitor and control your fog light and fog light bulbs. The V.4 has a slightly larger LED driver than normal because the CANBUS anti-flicker and anti-error circuitry is built in! No external components should be needed to install these bulbs with a CANBUS-Equipped vehicle. Easy plug and play installation. 2 year warranty.\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow light tint and give your ride an updated look with a cool white light beam? Look no further! These LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs.\u003c\/p\u003e \u003cp\u003eThe V.4: comes in every popular style to replace any fog light or fog light bulb. Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching V.4 LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e","brand":"SV4","offers":[{"title":"Default Title","offer_id":40989322641585,"sku":"SN.LED103-2PK","price":199.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9004-s-v_4-led-bulb-hilo-1.jpg?v=1754443875"},{"product_id":"sn-led108","title":"9007: S-V.4 LED Bulb (Hi\/Lo)","description":"\u003cp\u003eCutting-Edge LED Chip Technology: We challenge you to find another bulb on the market that produces as much light as the V.4 while still retaining a perfect beam pattern! The V.4 LED fog light bulbs utilize the newest multi-core LED chip styles that feature one long crystal over the entire diode array to create a seamless light output source. Most LED fog light bulbs on the market essentially create 2, 3, 4, or 6 different light sources by stacking 2-6 different chips together in a line. The NLW1860CV2 chips are based on XD14 technology developed by CREE, this custom designed LED chip has no light gap between diodes which gives it a closer function compared to the original filament bulb, thus achieving a greater beam accuracy that works best in any fog light or fog light housing.\u003c\/p\u003e \u003cp\u003eThermal Management: The V.4 LED fog light bulbs are built from the highest quality 6063 aluminum material originally designed for aircraft and space craft applications. This material has amazing heat dissipation qualities as well as is 100% corrosion resistant in automotive applications. On the bottom of the heat sink lies a high-speed double ball bearing micro-fan that is fully submersible and waterproof! If the fan stops working, the sophisticated thermal management system inside the bulb will dim the fog light until it is safe to use. Considering that these bulbs can be up to 6x brighter than your original bulbs, even at 50% power, they will still be safe to use on the street in most situations. The heavy duty LED bulb power driver has a built in smart fan circuit that ramps up the speed of the cooling fan as necessary so it's as quiet as possible when it can be.\u003c\/p\u003e \u003cp\u003eCompact Design: Most LED fog light bulbs that use a fan-based active cooling system are known for not being small or easy to fit inside fog light housings with a dust cover. The V.4 is designed to be as compact as possible. The mounting depth is 20-25mm on most bulb variants, low profile enough to fit even the most demanding of spaces! The heat sink \/ fan diameter is only 39mm! The LED driver on this bulb is larger than the previous generation, but it is still the right size to fit inside most fog light housings comfortably.\u003c\/p\u003e \u003cp\u003eCANBUS Compliant: Do your LED fog light bulbs flicker, pulse, give you errors and warnings on the dash? Do they even work at all?? Chances are your vehicle employs some version of CANBUS or PWM to control the lighting functions. These complex OEM systems rely on the physical readings of your original fog light filament to determine of your bulbs are operating properly. Simply put, when you install an LED fog light bulb, that function sometime determines that the bulb is broken, or missing entirely and will cause the truck to malfunction. Sometimes this means they don't come on at all, other times they flash, and sometimes they will suddenly shut off while you're driving! All of these things are solved by the built in CANBUS integration circuit found already inside the V.4 LED driver. Sometimes an extra PWM module may still be necessary, but this bulb is totally plug and play on the vast majority of vehicles on the road today, even brand new models!\u003c\/p\u003e \u003cp\u003eDimming: The V.4 bulbs dim less and less bright until they turn off at 8V DC.\u003c\/p\u003e \u003cp\u003eDRL: If the DRL function is lower than 8V DC, the bulbs will just not turn on at all. But if they use CANBUS or PWM at 12V DC they will work normally.\u003c\/p\u003e\u003cp\u003eCANBUS: Some vehicles use CANBUS function to monitor and control your fog light and fog light bulbs. The V.4 has a slightly larger LED driver than normal because the CANBUS anti-flicker and anti-error circuitry is built in! No external components should be needed to install these bulbs with a CANBUS-Equipped vehicle. Easy plug and play installation. 2 year warranty.\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow light tint and give your ride an updated look with a cool white light beam? Look no further! These LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs.\u003c\/p\u003e \u003cp\u003eThe V.4: comes in every popular style to replace any fog light or fog light bulb. Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching V.4 LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e","brand":"SV4","offers":[{"title":"Default Title","offer_id":40989323788465,"sku":"SN.LED108-2PK","price":199.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9007-s-v_4-led-bulb-hilo-1.jpg?v=1754443914"},{"product_id":"sn-led140","title":"5202: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324411057,"sku":"SN.LED140-2PK","price":189.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/5202-gtr-csp-mini-led-bulb-1.jpg?v=1754443996"},{"product_id":"sn-led142","title":"9004: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324476593,"sku":"SN.LED142-2PK","price":144.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9004-gtr-csp-mini-led-bulb-1.jpg?v=1754444003"},{"product_id":"sn-led144","title":"9006: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324574897,"sku":"SN.LED144-2PK","price":201.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9006-gtr-csp-mini-led-bulb-1.jpg?v=1754444009"},{"product_id":"sn-led145","title":"9007: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324607665,"sku":"SN.LED145-2PK","price":168.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9007-gtr-csp-mini-led-bulb-1.jpg?v=1754444012"},{"product_id":"sn-led146","title":"9012: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324837041,"sku":"SN.LED146-2PK","price":168.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/9012-gtr-csp-mini-led-bulb-1.jpg?v=1754444016"},{"product_id":"sn-led147","title":"H1: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324869809,"sku":"SN.LED147-2PK","price":201.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/h1-gtr-csp-mini-led-bulb-1.jpg?v=1754444019"},{"product_id":"sn-led149","title":"H13\/9008: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989324935345,"sku":"SN.LED149-2PK","price":201.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/h139008-gtr-csp-mini-led-bulb-1.jpg?v=1754444025"},{"product_id":"sn-led150","title":"H3: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989325066417,"sku":"SN.LED150-2PK","price":189.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/h3-gtr-csp-mini-led-bulb-1.jpg?v=1754444028"},{"product_id":"sn-led151","title":"H4\/9003: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989325295793,"sku":"SN.LED151-2PK","price":179.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/h49003-gtr-csp-mini-led-bulb-1.jpg?v=1754444031"},{"product_id":"sn-led152","title":"H7: GTR CSP Mini LED Bulb","description":"\u003cp\u003eThe GTR Lighting CSP Mini LED bulb: was designed with two main ideas in mind: #1: Perfect Fitment into any fog light housing - specially designed to closely mimic the size and shape of your original halogen light bulb for maximum capability! #2: Perfect Beam Pattern due to the alignment and design of the low-profile copper PCB and Philips Z ES \"CSP\" style LED chips.\u003c\/p\u003e \u003cp\u003eThis LED configuration: creates a similar light output profile as compared with the original filament bulb for an accurate beam pattern.\u003c\/p\u003e \u003cp\u003eHeat Sink Technology: No Fan Noise! Fans work well to cool down powerful LED fog light bulbs, but the GTR Lighting CSP Mini is unique blend of power and efficiency that does not require active cooling. Coming in at only 16 watts of power, and featuring the Philips Z ES high-efficiency chips, these bulbs create about 2 times as much light as your original halogen bulbs at less 33% less power consumption. In short, they're super efficient so they don't need a huge fan mounted to the heat sink to stay cool! The powder-coated aluminum body of the bulb acts as the heat sink for both the internal driver and the LED bulbs themselves.\u003c\/p\u003e \u003cp\u003eThermal Management: The GTR Lighting CSP Mini LED bulbs are equipped with a sophisticated thermal protection circuit to avoid failures due to overheating problems. We've tested these bulbs at 194 degrees Fahrenheit for 15 days straight without failure! The maximum power draw of these bulbs is 16 watts of power and if the LED thermister sensor reaches a temperature of 140 degrees Fahrenheit or hotter the temperature protection kicks in and reduces the light output to a safe level. This smart technology allows the bulbs to never get so hot that they burn out the chips, which is the most common reason for LED bulb failure. Even at a reduced level of 13 watts of power consumption (to prevent over-heating...), the GTR Lighting CSP Mini LED fog light bulbs will still be noticeably brighter than your old halogen bulbs! This function happens 100% automatically and ensures the longest possible lifespan of your fog light bulbs!\u003c\/p\u003e \u003cp\u003eFurthermore: the GTR Lighting CSP Mini LED fog light bulbs are equipped with the highest quality possible chip technology. We use the genuine Philips Z ES \"CSP\" style LED chips that have a higher heat-resistance rating than other similar versions. Beware of imitators! If someone is selling a bulb that looks like ours, make sure they're using the good chips like Philips ZES! These LED chips are rugged, heat-resistant and create the tightest optical source for the best beam pattern. Your fog light bulb LED chips really do make a difference!\u003c\/p\u003e \u003cp\u003eBrightness: Your original halogen incandescent fog light bulbs produce roughly 1,000 Lumen per light bulb, at about 55w of power consumption. The GTR Lighting CSP Mini bulbs produce 2,500 Lumen of light at only 16w of power consumption! Not only do these bulbs have the ability to be 2-3 times brighter than your old light bulbs, in most applications they will also mimic the OEM beam pattern to protect other drivers' vision at night!\u003c\/p\u003e \u003cp\u003eWant your fog lights: to shine brighter and further but your current bulbs just aren't cutting it? Want to get rid of that old yellow tinted light and give your ride an updated look with a cool white light beam? Look no further! Built with high power premium quality Philips Z ES LEDs, these LED fog light bulbs will cast a precise light beam that will give you increased visibility, a wider viewing angle, and a much longer lifetime over conventional halogen bulbs. The bulbs feature great heat management with 1070 aluminum construction, Intelligent Thermal Management, and the newest \"CSP\" style LED chipset from Philips.\u003c\/p\u003e\u003cp\u003eFitment: Match the bulb number of your original application (example: 9005, 9006, H4, H13, etc...) with the matching GTR Lighting CSP Mini LED fog light bulb and replace bulb for bulb. Fits all applications including projectors, and fog lights with dust shield covers.\u003c\/p\u003e \u003cp\u003eNOTICE: If your vehicle uses a CAN BUS system to operate the fog lights, you may need additional parts like an LED CANBUS or PWM module. Contact us for details if you are unsure.\u003c\/p\u003e","brand":"GTR Lighting","offers":[{"title":"Default Title","offer_id":40989325492401,"sku":"SN.LED152-2PK","price":168.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/h7-gtr-csp-mini-led-bulb-1.jpg?v=1754444034"},{"product_id":"led153","title":"RGBW Controller: Morimoto XBT (1x5 \/ 2x4 Wire Universal Standard)","description":"\u003cp\u003eBluetooth Benchmark: So you just invested $2000 and plenty of your time building a set of completely custom headlights with RGB accent lighting....you want to control it via bluetooth from your smartphone. Now what? Well, you could either rig up some generic white-box bluetooth controller and download some sketchy app to your iPhone, or you could plug-n-play with the all new XBT Bluetooth Controller from Morimoto and control it with their proprietary app that puts the power of control in the palm of your hand! Here's where most of our customers stop ready: they're usually already convinced! But read on if you want to learn more about this awesome RGB Bluetooth controller technology.\u003c\/p\u003e\n\u003cp\u003eiPhone \u0026amp; Android App: The specialized app works on both iPhone and Android devices. Inside, you've got control over nearly everything! The color-wheel allows you virtually infinite control over the exact hue and intensity of your RGB accessories. Adjustable Fade, Strobe, and pre-programmed color-changing themes provide a handful of special effects to spice it up. If you've got a few favorite combinations, you can save them to your favorites list and load 'em up again later with ease! Watch \u003ca href=\"https:\/\/www.youtube.com\/watch?v=Sw270XAt9ns\u0026amp;feature=youtu.be\" onclick=\"_gaq.push(['_trackEvent','Outbound Links','morimotohid.com'])\" target=\"new\"\u003eThis Video\u003c\/a\u003e from our friends at Headlight Revolution that goes over the XBT Bluetooth Controller!\u003c\/p\u003e\n\u003cp\u003eThree Zone: The XBT Bluetooth Controller is capable of controlling up to three different zones\/pairs of RGB accessories. Two pairs of halos and a set of Demon eyes? No problem. Demon eyes, strips, and halos? You bet. You can apply a different color or effect to each zone, or lock them together to easily apply the same settings across the board. If you can wire it, Morimoto RGB Controller can control it!\u003c\/p\u003e\n\u003cp\u003eLegalize It: If you like green, that's great! but it just so happens that white and amber are the only colors that are street-legal inside your headlights. For your safety and convenience - whenever the XBT System powers up (aka whenever you turn your vehicle on) - it defaults the output to white. So when you hop in the car in morning and head off to work - you don't have to worry about pulling up to the parking deck with your headlights still in rave mode because you hadn't had any coffee yet. But once you're parked, anything goes. With the flick of a finger you have full access to every color under the sun.\u003c\/p\u003e\n\u003cp\u003ePlug-n-Play: Unlike other options out there that require DIY wiring from the user's side, the XBT Bluetooth Controller is 100% Plug-n-Play. There is no wire stripping, cutting, or splicing involved. The outputs are based on an industry-standard JST 4-wire RGB+ setup - making it compatible with most any RGB accessories (not just ones from Morimoto).If you don't understand a word of what we just wrote, no worries. You can contact one of our geeky team members and we'll explain more about the awesome tech that goes into the Morimoto RGB Controllers we sell.\u003c\/p\u003e\n\u003cp\u003eOptional JST Connectors: In the event that your RGB accessories DO require custom wiring, the optional JST pins\/connectors make quick work of a clean install. Crimp, insert, and go! At under $10, this includes six connectors and 24 bare male pins! We figure your awesome aftermarket headlight upgrades are useless if you can't install them, so we carry the extras that make it easier to wire up your Morimoto RGB Controller.\u003c\/p\u003e\n\u003cp\u003eWhat a Beauty! As if you hadn't already made your decision...this Morimoto RGB Controller just looks plain badass and the quality is apparent from every angle. Pick up the XBT Bluetooth Controller and you'll feel the weight from the potted internals, making it completely waterproof. We don't carry flimsy, bottom-end Bluetooth controllers for RGB halo headlights, so if that's your thing, we're afraid you'll have to look elsewhere! The combo matte\/gloss finish on the injection molded shell is a nice touch, and in true car-guy fashion...we can't argue that the real carbon fiber mounting bracket makes us drool. Mmmm, carbon fiber stuff.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989325852849,"sku":"LED153","price":112.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/rgbw-controller-morimoto-xbt-1x5-2x4-wire-universal-standard-1.jpg?v=1754444040"},{"product_id":"pr56","title":"Bi-Xenon: Morimoto Mini D2S 5.0: (Round Lens\/LHD)","description":"\u003cp\u003eHigh Five! Morimoto has officially achieved Projector-Perfection with the 5th gen Mini D2S Bi-xenons! If you're looking for the ultimate beam pattern boner; it's really not going to get any better than this folks. Perfectly balanced beam. The crispiest ECE style cutoff. Unquestionable OEM-quality all packed into a projector that's undeniably easy to install. If we died and went to fog light heaven, the 5.0 would be greeting us at the gate.\u003c\/p\u003e \u003cp\u003eProjector-Perfection: There are other projectors that produce brighter hot spots. There are other projectors that have unholy amounts of width.But no other option creates the perfect balance of width \u0026amp; hotspot lux (aka distance) quite like the 5.0. In order to create the ultimate weapon for driving in the dark; Morimoto baked in best practices from a variety of well-respected OEM and aftermarket projectors. With over a decade of experience, we trust that their latest and greatest equates to the perfect all-around perfomer. \u003c\/p\u003e \u003cp\u003eDistance: The hot spot on the new 5.0 bi-xenon is roughly 70% brighter than the already-impressive 4.0 design. While the high beam unloads a lot more volume of light; virtually no additional intensity has been reserved. What that means: You get the maximum benefit from your bulbs \u0026amp; ballasts in default mode--where drivers spend 99% of their time. The controlled decrease in intensity from the hyper-hotspot down through the foreground results in a distribution of light that makes driving at night very comfortable \u0026amp; safe. Why? Because too much intensity on the ground too close to the front of your vehicle will make your eyes adjust, compromising your ability to see very far. Science!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003eWidth: Power is nothing without control, and even the best D2S bulbs and 50w ballasts won't always result in a satisfying output when projected out on the road improperly--so the KEY is really how that light is deployed. Thanks to the beauty in the center of this beast [all new optics package + flat cast cutoff shield] You really end up with a beam pattern that's extremely wide and flat, with zero bowing. But that's not all: The position of the shield has been fine-tuned so that there is a band of intense light that spans side-to-side directly under the cutoff line. RX350 Bi-xenons, S2000's, LS430s, SC430--all of the best from Koito now need to bite their tongue, because that's all they had on Morimoto prior to the 5.0 party!\u003c\/p\u003e \u003cp\u003eAnti-Reflective Coating Lens: The blue tint to the lens is more than marketing fluff too. That's an AR coating, and it serves a real purpose. AR coatings increase the transmission of light through the glass all while decreasing bleed. The result? 10% more light and less glare compared to a traditional clear lens. The blue-hue may not be for everybody, but in this case we're down. \u003ca onclick=\"_gaq.push(['_trackEvent','Outbound Links','link'])\" href=\"https:\/\/www.edmundoptics.com\/resources\/application-notes\/optics\/anti-reflection-coatings\/\" target=\"new\"\u003eRead more about AR coatings HERE.\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003eHardware Upgrades: Forget the finicky 2 piece bulb holders found on the 4.0s, these come standard with the MotoHolders: an all-new one-piece design that's far easier to work with. The new CNC machined aluminum lock rings are not only pretty looking, but they're 300% stronger than the old die cast part. To tighten them, Morimoto now offers an optional lock-ring tightening tool that works with any 10mm socket set. Torx screws now hold the lens holder on too instead of Philips screws. While the 5.0 get's a big boost in the performance department, it's also clear they've paid attention to the details in the parts department too. We like it!\u003c\/p\u003e \u003cp\u003eInstallation Summary: On a H4-based fog light reflector for example...Remove the fog light lens, insert the threaded mounting shaft through the pre-existing hole in the back of the reflector, add the alignment plate, tighten the lock ring, and re-seal the fog lights. For other applications, minimal cutting will probably be involved but you'll find the results well worth it! Check out the installation procedure linked above.\u003c\/p\u003e ","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989325918385,"sku":"PR56","price":246.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/bi-xenon-morimoto-mini-d2s-5_0-round-lenslhd-1.jpg?v=1754444057"},{"product_id":"gt70","title":"Pigtail Connectors","description":"\u003cp\u003eCovered: A treasure chest of common sockets, pins, inputs, and outputs! If you're building a custom harness or need to replace a corroded connector, we've got you covered!\u003c\/p\u003e \u003cp\u003eComplete: Each set will include all relevant plastic fittings, rubber seals, metal pins, etc. that are necessary for assembly. \u003c\/p\u003e \u003cp\u003eOne Piece: For each order (QTY = 1) you will receive one item, items are not sold as pairs. If you don't see what you're looking for, just ask!\u003c\/p\u003e \u003cp\u003eNOTE: WHEN REFERRING TO THE ITEM AS MALE OR FEMALE WE ARE REFERRING TO THE METAL PINS INSIDE, NOT THE SHAPE OF THE PLASTIC FITTING - PLEASE SEE IMAGES FOR REFERENCE\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"9006 Male","offer_id":43890152866022,"sku":"GT70","price":12.0,"currency_code":"CAD","in_stock":true},{"title":"9006 Female","offer_id":43890152898790,"sku":"GT80","price":12.0,"currency_code":"CAD","in_stock":true},{"title":"3157 Male","offer_id":43890152931558,"sku":"GT170","price":12.0,"currency_code":"CAD","in_stock":true},{"title":"9007\/9004 Female","offer_id":43890152964326,"sku":"GT120","price":6.5,"currency_code":"CAD","in_stock":true},{"title":"9007\/9004 Male","offer_id":43890152997094,"sku":"GT110","price":6.5,"currency_code":"CAD","in_stock":true},{"title":"H1\/H3 Female","offer_id":43890153029862,"sku":"GT20","price":7.8,"currency_code":"CAD","in_stock":true},{"title":"H1\/H3 Male","offer_id":43890153062630,"sku":"GT10","price":10.0,"currency_code":"CAD","in_stock":true},{"title":"H13\/9008 Female","offer_id":43890153095398,"sku":"GT100","price":12.0,"currency_code":"CAD","in_stock":true},{"title":"H13\/9008 Male","offer_id":43890153128166,"sku":"GT90","price":7.8,"currency_code":"CAD","in_stock":true},{"title":"H4\/9003 Female","offer_id":43890153160934,"sku":"GT140","price":10.0,"currency_code":"CAD","in_stock":true},{"title":"H4\/9003 Male","offer_id":43890153193702,"sku":"GT130","price":9.0,"currency_code":"CAD","in_stock":true},{"title":"H7 Female","offer_id":43890153226470,"sku":"GT40","price":9.0,"currency_code":"CAD","in_stock":true},{"title":"H7 Male","offer_id":43890153259238,"sku":"GT30","price":7.8,"currency_code":"CAD","in_stock":true},{"title":"H8\/H9\/H11\/880 Female","offer_id":43890153292006,"sku":"GT60","price":7.8,"currency_code":"CAD","in_stock":true},{"title":"H8\/H9\/H11\/880 Male","offer_id":43890153324774,"sku":"GT50","price":7.8,"currency_code":"CAD","in_stock":true},{"title":"T10 Male","offer_id":43890153357542,"sku":"GT180","price":9.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/pigtail-connectors-1.jpg?v=1754444157"},{"product_id":"rq104","title":"RQ Hardware: Toyota 4Runner (14-21) (MLED)","description":"\u003cp\u003eNow sold Separately! For a long time, the RetroQuik brackets were only available as part of the full kits. After serving many requests to sell them separately, here we have it! Ask and ye shall receive.\u003c\/p\u003e \u003cp\u003eGood Stuff: 100% Engineered in the US. Laser cut from automotive-grade G10 fiberglass. The Retro-Quik brackets at the heart of our RetroQuik kits are designed to adapt the Morimoto Bi-xenon projectors directly in place of the unsophisticated stock units. Using the original mounting holes paired with new hardware, they are the beauty behind the kit that makes it an easy install. You're welcome. \u003c\/p\u003e \u003cp\u003eWhats Included: These brackets are designed to work with a variety of projectors. While they come with the hardware, they do not include the projectors - and ultimately it's up to you to make sure you've got the right gear to put it all together.\u003c\/p\u003e ","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989327786161,"sku":"RQ104","price":64.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/rq-hardware-toyota-4runner-14-21-mled-1.jpg?v=1754444198"},{"product_id":"a282","title":"Housing Cap: Cylinder (75mm)","description":"\u003cp\u003eSeal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be your perfect solution to close that back up for good.\u003c\/p\u003e\n\u003cp\u003eSizing: These rubber housing caps are available in a variety of diameters and shapes to fit the most common headlight flanges.\u003c\/p\u003e\n\u003cp\u003eTo Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them.\u003c\/p\u003e\n\u003cp\u003eDurable: These headlight accessories are made of durable black rubber, they won't harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing.\u003c\/p\u003e\n\u003cp\u003eWhat else? Well...that's about it. They're rubber, they're housing caps, they keep crud out of your custom headlights. If you have a gap, you probably should order our rubber housing caps. That's all!\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989328081073,"sku":"A282","price":9.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/housing-cap-cylinder-75mm-1.jpg?v=1754444211"},{"product_id":"a283","title":"Housing Cap: Stepped (96mm)","description":"\u003cp\u003eSeal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be your perfect solution to close that back up for good.\u003c\/p\u003e\n\u003cp\u003eSizing: These rubber housing caps are available in a variety of diameters and shapes to fit the most common headlight flanges.\u003c\/p\u003e\n\u003cp\u003eTo Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them.\u003c\/p\u003e\n\u003cp\u003eDurable: These headlight accessories are made of durable black rubber, they won't harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing.\u003c\/p\u003e\n\u003cp\u003eWhat else? Well...that's about it. They're rubber, they're housing caps, they keep crud out of your custom headlights. If you have a gap, you probably should order our rubber housing caps. That's all!\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989328179377,"sku":"A283","price":17.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/housing-cap-stepped-96mm-1.jpg?v=1754444220"},{"product_id":"a285","title":"Housing Cap: 32mm Round","description":"\u003cp\u003eSeal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be your perfect solution to close that back up for good.\u003c\/p\u003e\n\u003cp\u003eSizing: These rubber housing caps are available in a variety of diameters and shapes to fit the most common headlight flanges.\u003c\/p\u003e\n\u003cp\u003eTo Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them.\u003c\/p\u003e\n\u003cp\u003eDurable: These headlight accessories are made of durable black rubber, they won't harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing.\u003c\/p\u003e\n\u003cp\u003eWhat else? Well...that's about it. They're rubber, they're housing caps, they keep crud out of your custom headlights. If you have a gap, you probably should order our rubber housing caps. That's all!\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989328277681,"sku":"A285","price":10.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/housing-cap-32mm-round-1.jpg?v=1754444238"},{"product_id":"chevrolet-camaro-16-18-pair-lambo-red-morimoto-xb-led-tails-lf400","title":"Chevrolet Camaro (16-18) (Pair \/ Lambo \/ Red): Morimoto XB LED Tails","description":"\u003cp\u003eStock Sucks: No doubt the sixth gen Camaro is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Camaro LED tail lights too!\u003c\/p\u003e \u003cp\u003eCompatible: With with all 2016+ Camaro's, these complete tail light assemblies will swap directly in place of the original Camaro tail lights, use all of the stock mounting points, and should only take around 30 minutes to install.\u003c\/p\u003e \u003cp\u003ePlug n Play: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock lights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!\u003c\/p\u003e \u003cp\u003eStyle: Inspired by the Lamborghini Aventador, while they look radical, they don't look out of place like other aftermarket options. The piano black finish matches the OEM trunk trim perfectly. The geometry flows with the body lines like a boss. The XB LED tails for your Camaro are available with either a smoked or red lens. Both will illuminate red. \u003c\/p\u003e \u003cp\u003eWell-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB Tail lights may not be the cheapest new tail lights for your Camaro, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Morimoto XB LED Tails","offers":[{"title":"Default Title","offer_id":40989328736433,"sku":"LF400","price":497.9,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/chevrolet-camaro-16-18-pair-lambo-red-morimoto-xb-led-tails-1.jpg?v=1754444319"},{"product_id":"wp325","title":"Techflex Mesh Sleeving","description":"\u003cp\u003eHella OEM: Couple this abrasion-resistant TechFlex mesh sleeving with our cloth harness tape for the best wiring job possible.\u003c\/p\u003e \u003cp\u003eHella Clean: Convoluted plastic tubing has no place in a quality install, no matter who does or doesn't see it. Keep your wiring tightly together with this epic wire sleeving that is used on every harness we sell!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"6mm","offer_id":43889259086054,"sku":"WP325","price":20.0,"currency_code":"CAD","in_stock":true},{"title":"8mm","offer_id":43889259118822,"sku":"WP326","price":15.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/techflex-mesh-sleeving-1.jpg?v=1754444345"},{"product_id":"lf432","title":"Morimoto XB LED Brake: 2010-2014 Mustang 3BL (Red)","description":"\u003cp\u003eStock Sucks: No doubt the S197 Mustang is a capable car, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers in our catalog forever, and we couldn't be more excited to see the lineup expand with offerings such as the new high-performance XB Mustang LED third brake light too!\u003c\/p\u003e\n\u003cp\u003eCompatible: With all S197 Mustangs from 2010-2014, these complete tail light assemblies will swap directly in place of the original Mustang third brake light, use all of the stock mounting points, and should only take around 15 minutes to install.\u003c\/p\u003e\n\u003cp\u003ePlug n Play: Wiring is easy too! The XB LED tails are designed to work without any special wiring. They will plug into the factory connectors for the stock light and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No additional resistors, modules, etc needed!\u003c\/p\u003e\n\u003cp\u003eWell-Built: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is light-weight and much stronger than comparable cheap alternatives. The XB LED third brake light may not be the cheapest, but they're OE quality, and as the saying goes, you pay for what you get. Although the tails are new, we've sold many thousands of the XB Fog lights and to date, have only seen a small handful with problems...no joke.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989330178225,"sku":"LF432","price":156.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/morimoto-xb-led-brake-2010-2014-mustang-3bl-red-1.jpg?v=1754444475"},{"product_id":"ford-mustang-10-12-morimoto-xb-led-headlights-lf440","title":"Ford Mustang (10-12): Morimoto XB LED Headlights","description":"\u003cp\u003eNo Substitutes: If you don't have LED powered headlights on your Ford Mustang, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Mustang LED headlights on the market today.\u003c\/p\u003e \u003cp\u003eOEM Plus: At our shop we live, eat, and sleep headlights. While the Mustang LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes \"you pay for what you get\". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed.\u003c\/p\u003e \u003cp\u003ePerformance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light.\u003c\/p\u003e \u003cp\u003eDOT Approved: Make no mistake, these will produce a much different [better] result than slapping some LED replacement bulbs into your stock housings. Their projector optics meet \u0026amp; exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical\/lateral adjusters.\u003c\/p\u003e \u003cp\u003ePlug-n-Play: Wiring is easy too! The XB Mustang LED headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.\u003c\/p\u003e \u003cp\u003eLED DRL: Game Changer! Their LED daytime running light is powered by Osram 5000K LEDs and is insanely bright, easily visible during the day..\u003c\/p\u003e \u003cp\u003eWell-Built: Their UV-coated polycarbonate lens will resist the test of time, ensuring your Mustang headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.\u003c\/p\u003e \u003cp\u003eThey Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim keep the color scheme neutral, and the kuria-optic projectors are as modern as it gets.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Morimoto XB LED Headlights","offers":[{"title":"Default Title","offer_id":40989330276529,"sku":"LF440","price":1240.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/ford-mustang-10-12-morimoto-xb-led-headlights-1.jpg?v=1754444491"},{"product_id":"led1462","title":"T3: Profile Crown","description":"\u003cp\u003eProfile Performance: It's not like LED bulbs in the automotive world are a new thing, but these guys are coming in hot and packing a serious punch with the new Crown series. Lucky for us they're still offering some value-minded options that won't break the bank, but don't mean much compromise in the performance department too. Though fairly basic, their T3 dash bulbs are are a top seller because they work well, cost next to nothing, and never fail. We love em, and so do our customers!\u003c\/p\u003e\u003cp\u003eMulti-Use: 20 lumens might not sound like a lot, but it's far brighter than your stock halogen dash bulbs.The Crown LEDs make for an awesome upgrade in performance and style. If you're looking for something brighter and whiter: then you can pick up a handful of the Crown T3 LED bulbs for your dashboard upgrade project and we know you'll be happy with 'em. \u003c\/p\u003e\u003cp\u003eModern: The Crown T3 LED bulbs are superior to other options from an installation and compatibility standpoint. The main body of the bulb doubles as the base with a double-wide contact to ensure perfect contact with factory bulb sockets. (no thin wire-based contacts that can easily bend out of the way or even break). The composite base will last forever, won't crack or become brittle over time.\u003c\/p\u003e\u003cp\u003eIndustrial: No fancy looking housing here! The Crown T3 puts everything they've got out in the open. The naked LED chip is directly in view and there are no frills...and why should there be? Once it's installed, the only thing you should care about is their performance \u0026amp; reliability. Profile is all about producing added performance without the extra price, and that shows given how well they work and how inexpensive they are.\u003c\/p\u003e\u003cp\u003eCanBus: The Profile Crown LED bulbs are CanBus friendly and shouldn't cause any dashboard errors in most every application. No need for extra resistors or inline modules to resolve that. Just Plug n Play!\u003c\/p\u003e\u003cp\u003eBy the Numbers: One powerful 3528 cool white LED. 20 lumens per bulb. less than 2 bucks per bulb. All of that should add up to one happy customer!\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e","brand":"Profile Performance","offers":[{"title":"Default Title","offer_id":40989330440369,"sku":"LED1462-2PK","price":9.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/t3-profile-crown-1.jpg?v=1754444520"},{"product_id":"a286","title":"Housing Cap: Extension","description":"\u003cp\u003eSeal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be your perfect solution to close that back up for good.\u003c\/p\u003e\n\u003cp\u003eSizing: These rubber housing caps are available in a variety of diameters and shapes to fit the most common headlight flanges.\u003c\/p\u003e\n\u003cp\u003eTo Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them.\u003c\/p\u003e\n\u003cp\u003eDurable: These headlight accessories are made of durable black rubber, they won't harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing.\u003c\/p\u003e\n\u003cp\u003eWhat else? Well...that's about it. They're rubber, they're housing caps, they keep crud out of your custom headlights. If you have a gap, you probably should order our rubber housing caps. That's all!\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Default Title","offer_id":40989331882161,"sku":"A286","price":9.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/housing-cap-extension-1.jpg?v=1754444629"},{"product_id":"a83","title":"Compression Clip: Morimoto C-Clip","description":"\u003cp\u003eThe Right Stuff: If you've ever cut the lens clean off a pain-in-the-ass permaseal headlight or found yourself squeezing a set of pliers around the outside perimeter of a housing trying to get it to go back together, or these are for you!\u003c\/p\u003e \u003cp\u003eSimple: The concept here is simple. The claws on one side dig into the plastic to provide you with \"traction\" and the set-screw on the other side presses the two halves back together. \u003c\/p\u003e \u003cp\u003eTake it or leave it: If you've got a really stubborn housing on your hands, you can leave the clips in place permanently. If you just need them to keep everything nice and tight while the glue is cooling off (and hardening up) - they can be removed and re-used again too.\u003c\/p\u003e \u003cp\u003eConstruction: Stamped from steel and finished with black oxide, these beefy clips will not only hold strong under high pressure without bending, they won't rust or wear over time either.\u003c\/p\u003e \u003cp\u003eAdjustable: Why not just offer the common \"C\" clips found on many OEM headlights? You have to have a specific length in order for them to be useful. The Compression Clips can re-seal housings as narrow as 9mm and and wide as 19mm.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989331980465,"sku":"A83","price":7.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/compression-clip-morimoto-c-clip-1.jpg?v=1754444658"},{"product_id":"wp327","title":"HD Butt Connector","description":"\u003cp\u003eButt why: Do you spend $400 on a badass custom set of headlights, and skimp out on the wiring parts? Don't use butt connectors designed for residential use on your car! \u003c\/p\u003e \u003cp\u003eHelpful: These HD Butt connectors are straight up badass. Insert the wire. Press closed. Get on with your project. We've not seen a better butt (connector) before these. They're that solid.\u003c\/p\u003e \u003cp\u003eSold Individually: These little guys are sold individually, so be sure to stock up. Both the double and single options are for use on 24-18 gauge 12V wiring. No amplifier installs here, but rock solid for all your accent lighting needs.\u003c\/p\u003e \u003cp\u003eDE Grease: We strongly recommend opting for the dielectric grease to ensure moisture and liquids can't contact the metal in these taps. With grease, your install is golden.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e","brand":"Acme","offers":[{"title":"Single Wire","offer_id":43888972267750,"sku":"WP327","price":4.5,"currency_code":"CAD","in_stock":true},{"title":"Double Wire","offer_id":43888972300518,"sku":"WP328","price":8.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/hd-butt-connector-1.jpg?v=1754444668"},{"product_id":"s263","title":"Panamera Insert: Profile Pixel (RGB)","description":"\u003cp\u003eProfile Performance: The automotive aftermarket's best name in LED Lighting and when it comes to upgraded LED DRL Boards, their new tech and it's features make it a no brainer! Fact is that while the rest of the industry is busy sticking their name on a generic or standing still with the same-old same-old; Profile is working hand-in-hand with the industry's experts to produce products with the performance and features that we all expect. Our customers are loving the new Pixel Panamera Insert Boards that they're cranking out, and here's why!\u003c\/p\u003e\n\u003cp\u003eRGBWA: With their powerful RGBW LEDs, The Profile Pixel Panamera inserts are capable of producing an amazingly clear neutral white, a pure amber, and every other color in the spectrum for that matter.. Reds, blues, greens, teals, purples, pinks...you name it! The system is designed to run in white mode until you activate the RGB system through your app controller, at which point you can tune their color exactly to your liking. Turn the RGB system off, and they'll automatically default back to white to keep you street legal. All that aside, and these things are just plain bright...easily outshining the factory LED setup. Pixel = Perfection!\u003c\/p\u003e\n\u003cp\u003eSwitchback: Profile's specially designed drivers have a separate input wire for your turn signal circuit. When triggered, the LED driver will automatically interrupt the RGB\/white mode and flash the integrated amber LED chips for a modern switchback turn signal in your DRL position. When the turn signal stops, the RGB or white mode will automatically return to its previous setting. Functional\u003c\/p\u003e\n\u003cp\u003eRemote Control: First-time users will need to purchase an optional RGBW Controller. The Morimoto XBT is required for the Pixel DRL boards, has a killer Iphone\/Android Bluetooth app, and three channels, which can be controlled independently.\u003c\/p\u003e","brand":"Morimoto","offers":[{"title":"Default Title","offer_id":40989332111537,"sku":"S263","price":94.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0604\/4811\/2817\/files\/panamera-insert-profile-pixel-rgb-1.jpg?v=1754444683"}],"url":"https:\/\/www.prolightz.com\/fr\/collections\/special.oembed?page=10","provider":"Prolightz","version":"1.0","type":"link"}