Retrofitting: has never been so easy! Designed to be a "bolt-on" upgrade for the Subaru Impreza headlight, the Morimoto Retro-Quik system uses laser cut brackets made of G10 fiberglass to adapt high-performance projectors in place of the de-tuned stock units. Here, there is no need to worry about alignment, major cutting, drilling, glue, etc. Out with the old and in with the new!
Morimoto 4TL-R Projectors: A recent addition to this system, the new 4TL-R combines performance similar to the Mini D2S 3.0, but still just as easy to install. They produce a very wide beam pattern with a perfect distribution of light and top it off with a supremely sharp cutoff that will blow your mind. We're gonna go ahead and say not many projectors will out-shine the 4TL-R. Even with a clear lens swap and an experienced hand, you would be hard-pressed to tune OEM STi low beam projectors to even come close performance-wise!
Matsushita Gen V: OEM Subaru ballasts have an instant warm up time; bringing the HID bulbs to their full intensity within 2-3 seconds. Long life, and a compact size round out their features. Since the ballasts bolt right up to the bottom of the OEM Impreza headlight, they make for the cleanest install possible!
Morimoto XB D2S Bulbs: At the heart of the XB D2S bulbs is their perfectly aligned 100% Philips Quartz glass that houses a capsule from APL-USA. Using high quality halide salts from German-supplier Messer; the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. No, you're not seeing things here, but yes you will be seeing everything at night.
Standalone Can-Bus Harness: replaces the relayed battery harness with two individual sub harnesses. Recommended for vehicles that recognize when a bulb is out, these contain a series of capacitors and resistors to trick the car into thinking nothing has changed and help you avoid annoying "bulb out" warnings. Great for many modern Euro applications
Accessorize: The optional Retro-Rubber glue is the most effective solution to fight back against moisture-intrusion after resealing your headlights. For the cost, it's "cheap insurance" for sure. Want to add LED Halos to accent the new projector setup? Check out new all-new XSB LED Halos and our Size Guide, so you can pick out the right rings for your shrouds.
Featured in a recent issue of Modified Magazine, you can check out their review of the Retro-Quik Kit that we provided them for their Subaru Impreza project car.
2x Projectors: Morimoto 4TL-R2x
Brackets: Impreza-Specific G10 FiberglassAll
Hardware: Automotive Grade Stainless
Warranty: Five Years
2x Ballasts: Matsushita G52x Bulbs:Morimoto XB D2S1x
Wire Harness: Morimoto Relay
Headlight Sealant: Morimoto RetroRubber
Compatible with 2006-2014 WRX/STi and 2006-2011 Impreza. Note that the 06-07 model requires extra trimming to install! This kit is NOT compatible with the 2012+ Impreza. (Must have stock projector-based lights!)