Morimoto Can-Bus Harness

As low as: USD$29.52

Morimoto Can-Bus Harness

As low as: USD$29.52

Price as configured: USD$0.00

* Required Fields

Price as configured: USD$0.00


PERFECT: The Morimoto Standalone wire harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to "bulb out" warning lamps and flickering caused by "can-bus" systems.


EFFECTIVE: Each harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Check out this video showing just how simple these are to setup.


POWERFUL: The Morimoto Standalones also feature Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicles factory headlight circuit.


EURO-CENTRIC: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. They DO NOT however work well on domestic cars/trucks like Chrysler/Dodge/Jeep. You guys need Morimoto's "Mopar Spec" Stuff!


SIMPLE: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it's that easy. Input here, output there...done.

SOLD AS A PAIR: The standalone canbus harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one.

NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.



  • HARNESS: 2x Morimoto Standalone CanBus
  • INPUT ADAPTERS: 2x Selected Fitment
  • WARRANTY: 2 Years



  • CANBUS SYSTEM: Most European Spec (VW, Audi, Mercedes)
  • INCOMPATIBLE: Mopar Vehicles (requires "Mopar Spec" harnesses)
  • ORIGINAL BULB SIZE: All sizes available
  • HID SYSTEMS: 35w or 55w
  • BI-XENON PROJECTORS?: You'll need: High Beam Splitters



  • INPUT: 2 or 3 Pin (Depending on Application)
  • OUPUT: 9006 female (industry standard)
  • HIGH BEAM: 2-pin Molex Female (H4, 9007, H13 only)
  • SHELL MATERIAL: Extruded Aluminum
  • FINISH: Black Anodized